Bell Roof & ExteriorVetted Bell roofing crews, no obligation to hire.Get on the list

Bell, CA

Where the water goes after it leaves the roof

If you are re-roofing anyway, gutters are the one add-on that is genuinely cheaper done at the same time.

Describe the gutters job

Three questions, then the address. Up to three Bell contractors who do this work.

Free · No obligation

Get on the list

We are lining up licensed providers near you. Leave your details and we will email you when one can take this on.

Step 1 of 6

What best describes your home?

Different buildings need different crews, so this is the first thing a roofer asks.

Free, and no obligation to anyone.

Before you let anybody on the roof

The things worth pinning down on a gutters job. A contractor who has not raised them has not looked properly.

  • Gutter size against the roof area draining into it
  • Seamless or sectional, and what gauge of aluminium
  • Where the water is discharged, and how far from the foundation
  • Number and position of downspouts
  • Condition of the fascia behind the old gutter

Check the fascia before the gutter goes back up. Hanging new metal off soft wood buys you a year.

Seamless aluminium formed on site is the default. Sectional gutter from a box store is cheaper and leaks at every joint within a few years.

Downspouts are where most systems actually fail — too few of them, or discharging straight against the foundation.

Locally

Then, less dramatically: shaded slopes that never really dry out. Nothing dramatic happens. A slope stays damp most mornings for thirty years, and eventually that is enough.

About gutters here

Can I just put a new roof over the old one?

Often you legally can, and it is usually a poor idea. Overlaying hides the condition of the decking, adds weight, shortens the life of the new shingles by trapping heat, and doubles the cost of the next tear-off.

What does a new roof cost in Bell?

For a typical Bell home of about 25 squares, an architectural asphalt re-roof usually lands between $12,500 and $28,500. Tile, slate and standing-seam metal run well above that. The number moves on how many old layers come off, how much decking is soft underneath, and how easily a truck can get to the house.

Do I have to hire anyone?

Not at all. Plenty of people use this to find out what a job costs and then do nothing for a year. That is a perfectly reasonable outcome.

Should I take the cheapest quote?

Only if it is the same roof. Most large gaps between quotes are scope gaps. Ask the cheapest contractor which of the other quotes items they have left out, and why.

Start with a free estimate

No cost. We email you once when a provider near you can take it on.